Technical featuresDownload technical datasheet
|Battery size||s: 20 / e: 30 kWh|
|Average operating time||s: 5 / e: 8 h|
|Average charging time (80%)||s: 1h45 / e: 2h30 h|
|Output of work hydraulics||48 L/min|
|Pressure of work hydraulics||180 bar|
|Kerbweight without attachment||1550 kg|
|Lifting force||1150 kg|
|Breakout force||955 kg|
|1260 kg||970 kg||740 kg|
|B||2710 mm||Chassis length|
|C||3390 mm||Total length with shovel bucket|
|D||950/1350 mm||Overall width|
|E||1000/1350 mm||Shovel bucket width (standard)|
|F||47 °||Maximum turning angle|
|G||2400 mm||Turning radius outside edge|
|H||2260 mm||Rollbar height|
|I||1270 mm||Seat height|
|J||315 mm||Ground clearance|
|K||30 °||Tipping-in angle from ground surface|
|L||1230 mm||Arm hinge height|
|M||1975 mm||Transfer height|
|N||2145 mm||Shovel bucket rotation point, maximum|
Gebroeders Geens, the family business behind Knikmops and Rollmops, proudly presents their electrical articulated loader. The Knikmops KM 140 E wields the familiar power of Knikmops, but this time without any emissions
Gebroeders Geens nv went looking for an electrical articulated loader that had to be energy-efficient above all. That would enable working with a smaller battery pack. This has several benefits: lower weight, shorter charging time, and not unimportantly, lower cost.
This is because the size of the battery is the largest component of the cost of your electrical articulated loader. The result was the Knikmops KM 140 E.
Standard - Endurance
This Belgian designer now presents the market with not one but two options for entrepreneurs who want to transition to zero emissions. The Knikmops KM 140 E Standard has a 20 kWh battery, which is good for an average of 5 hours of hard work. Charging from 0 to 80% is done in 1 hour, or 45 minutes when using the quick charger.
If you prefer to continue working for longer with your Knikmops, then Gebroeders Geens can offer: The Knikmops KM 140 E Endurance. Because the battery has a capacity of 30 kWh, the Knikmops operator can continue working for about 8 hours, and charging can be done in 2 hours and
30 minutes using the quick charger.
This enables users to choose the electrical Knikmops that is perfect for them.
Because the familiar power of Knikmops remains. This articulated loader can lift around 1500 kg, which is a very similar capacity to its diesel sibling the new Knikmops KM 140. Operators will also be pleasantly surprised by the driving speed, as the Knikmops KM 140 E moves at a fast 16 km/h.
The photos on the website do not show the standard configuration for the electric wheel loader. This means that the standard Knikmops KM 140 E may deviate from the photos.